2017 SUPER PRODUCTS SUPERSUCKER 6227 INDUSTRIAL VACUUM LOADER
2017 SUPER PRODUCTS SUPERSUCKER 6227 AIR MOVER
Boom, Polyurea Coating, Extended Warranties
Used Super Products Supersucker Model 6227 Industrial Wet/Dry Vacuum Loader
DEBRIS BODY
- 18 cu. yd. Clean Bore Collector Body with Tailgate Made of 1/4” Thick Steel with Reinforcements
- Double Acting Telescopic Dump Cylinder
- 51° Dump Angle
- Collector Body Prop
- Float Ball Clean-out Port
- Three (3) Hinge Rear Tailgate Door
- Hydraulically Raised and Lowered Tailgate with Hydraulic Latch System
- 30 Gallon Hydraulic Tank with Sight and Temperature Gauge, Rear Door Support, Dump Tube Doors – Open Independent of Tailgate
- Wiring Harness
- 14” Stainless Steel Float Ball Shut-off
- Liquid Level Indicator
- NEMA 4 Water Tight Control Panel with Clear Acrylic Cover Includes Air PSI gauge,
- Hyd. PSI gauge
- Vacuum Gauge
- Vacuum Pump
- Tachometer/Hourmeter
- Filter Pulsing ON/OFF Switch
- Panel Light with Switch
- Engine Throttle and Hydraulic Controls at Operator Station Behind Cab on Left Side of Unit
- Fold Out Ladder on Driver’s Side
- Platform Between Body Ladder and Baghouse Area
- 8” diameter rear knifegate drain valve,
- rear work lights
- Electric Vibrator on Collector Body
- Toolbox
- Hydraulic boom with manual rotation and brake
- hydraulic control lockout
- grounding reel
VACUUM SYSTEM
- Roots 28” Hg 6000CFM Positive Displacement Blower Vacuum Pump, 1,100 Hours,
- Temperature Gauge
- Wearliner in Separator
- Dual Rear Porthole elbows with Deflector
- Electric Vacuum Relief Valve
- Manual Vacuum Relief Valve
- High Efficiency Exhaust Silencer
- Hydraulic Pump Mounted Directly on Transfer Case
- Heavy Duty OMSI Transfer Case With Manual Shifting,
FILTRATION SYSTEM
- Single Stage Filtration for Wet or Dry
- Single Path Air Flow
- No Switchover System
- Baghouse and Separator Storage Constructed of 1/4” Steel
- Access Doors for Baghouse and Separator Storage Areas
- Bolt-on Steel Side Chutes for Baghouse and Separator Unloading with Payload
- Sixty (60) Snap Ring Filter Bags
- Filter Bag Pulsing system with 1” Diaphragm Valves
- Single Centrifugal Separator Located in Air Stream
- Stainless Steel Final Filter Screen at Vacuum Pump Inlet
SPECIAL OPTIONS:
- Polyurea coating applied to inside of collector body, inside of baghouses (up to bottom edge of tube sheets)
- inside separator house and inside dust chute tubes.
- Underside of tube sheets painted white.
- Inside of baghouse cover doors
- inside separator cover door
- top side of separator and top side of baghouse tube sheets all painted white.
CHASSIS:
- 2017 Peterbilt 567
- Cummins 425HP engine
- back up camera
- Odometer showing 9,300 Miles.
- Five Year Warranty on Engine and after-treatment.
- Supersucker factory warranty remaining.